PrintShelf

Compare at: $129.95

Try Just One for only: $49.78

Item Number: PrintShelf

Actual Opening Size

* denotes required field

Fit my Cabinet Opening of*

Cabinet opening width - within 1/16 inch*

Answer

Glide Type*

Installation Type*

Quantity:

Order 2 or more same size for a quantity discount.

Quantity	Amount
2 to 9999	$47.79

Custom sized: To specify width, see "Product Options", above.

SPECIFICATIONS: Pull Out Printer Sliding Shelves are 22” long front-to-back. The Shelf is 3/4" thick Baltic Birch or Native Birch, edge banded so the plywood edges do not show.

USE THiS Pull Out Printer Shelf to make using your printer convenient, while able to push it back in place when not in use.

INSTALLATION: These Pull Out Printer Shelves are set up to attach to the surface below as standard. For a cabinet with no existing shelves on which to attach a Sliding Shelf, or for a cabinet with an existing half-shelf, please let us know with a follow-up e-mail. We will send the appropriate installation hardware at no additional cost.

CONSTRUCTION: The shelf floor is 3/4” plywood, edge banded on all 4 sides. The 3/4-extension glides (standard) allow your Sliding Shelf to pull out about 16-1/2". With the Full-Extension option your High-Back Sliding Shelf will pull out the full 22". The hidden glides are not available for the Pull Out Printer Shelf. Our Glides have been tested through 100,000 open/close cycles , are rated at 100# load (75# dynamic), and have a limited lifetime warrantee.

READY FOR FINISHING: Sliding Shelves are Hand Sanded, ready for staining or painting. Baltic Birch stains well in almost any hew. Lighter stains highlight the natural beauty of the variation in color and grain, while darker stains even out the color somewhat. A pre-stain sealer tends to even out the color even more.